Mammoth Tooth Spacer Block Stabilized for Knife Handle 2.4-1.65-1.06 inch T544

Stabilized Woolly Mammoth Tooth Block for Knifemaking – Spacer Size

This unique stabilized mammoth tooth block is suitable for knife handle spacers, inlays, and small custom knife projects.

The block is made from genuine woolly mammoth tooth material sourced in Yakutsk, Siberia and professionally stabilized to improve durability and machinability.

Unlike standard handle blocks, this piece is spacer size — commonly used by knifemakers for decorative spacers between handle materials or for smaller custom knife handles.

Each piece is one-of-a-kind fossil material with natural prehistoric patterns formed thousands of years ago.

Stabilization

The material is stabilized using vacuum-pressure cycles with Cactus Juice stabilizing resin and then cast with Alumilite resin, which significantly increases strength and reduces cracking during machining.

Material properties

Mammoth tooth is a very dense fossil material, comparable in hardness to stone.

For cutting and shaping it is recommended to use:

bandsaw with stone cutting blade

diamond disk for stone / glass / tile

metal hand saw (possible but slow)

Size

Attention! The correct size of the block is in the description! NOT ON PIC!!!

Size in mm:

59 × 44 × 28 mm

Size in inches:

2.32 × 1.73 × 1.14 inch

Notes

The block is coated with protective automotive varnish which acts as a temporary protective transport layer.

Shipping

Ships from our USA warehouse in Reisterstown, Maryland.

If you have any questions — feel free to contact us.

#mammothtooth #mammothtoothblock #stabilizedmammothtooth #woollymammoth

#fossilmaterial #knifehandlematerial #knifemaking #knifemakingsupplies

#knifehandles #knifemakers #customknife #customknifemaker

#knifemakingcommunity #knifehandle #handmadeknife

woolly mammoth tooth stabilized block for knifemaking and handmade

stabilized (impregnated with vacuum-pressure cycles with a composition for stabilization Cactus Juice and after cast with alumilite resin)

size in mm: 61-42-27

size in inches: 2.4-1.65-1.06

material from Yakutsk, Siberia.

The material is very hard (similar on stone). For cutting you can use bandsaw for stone or disk for stone/glass/tile or a hand saw for metal (but it will take a long time to saw).

covered with automotive varnish on top (protectiv a transport layer)

delivery from USA storage in Mississipi.

if you have questions please write

#mammoth #mammothscales #mammothblock #knifehandlematerial #knifemakingcommunity #knifehandles #knifemakingsupplies #knifescales